ZX horizontal self-priming centrifugal pump, clear water self-priming pump, agricultural self-priming centrifugal pump

I. Overview of ZX Self-Priming Centrifugal Pump

The ZX horizontal clean water self-priming centrifugal pump is a self-priming pump model connected by a motor through a coupling and a pump body. Its main feature is the self-priming function, which eliminates the need for a bottom valve in the pipeline. Before operation, only a fixed amount of priming liquid needs to be stored in the pump body to realize the "one-time priming, lifelong self-priming" function. It has the advantages of compact structure, convenient operation, stable operation, easy maintenance, high efficiency, long service life, etc. The pump body and flow-passing components can be made of cast iron and various grades of stainless steel, and the motor can be equipped with a frequency conversion motor and an explosion-proof motor. It is widely used in industrial departments such as petroleum, chemical industry, metallurgy, machinery, chemical fiber, food, energy, transportation, etc., for urban water supply, and can also be used for agricultural irrigation and sprinkler irrigation. It is used to transport clean water or other liquids with physical and chemical properties similar to clean water, with a viscosity less than 5°E and a temperature lower than 80℃.

II. Structural Principle of ZX Self-Priming Centrifugal Pump

The pump body of the ZX horizontal clean water self-priming centrifugal pump consists of a suction chamber, a liquid storage chamber, a volute, a return hole, a gas-liquid separation chamber, etc., adopting an axial return structure. After the pump starts normally, the impeller sucks the liquid stored in the suction chamber and the air in the suction pipeline together, and they are fully mixed in the impeller. Under the action of centrifugal force, the liquid carrying gas flows toward the outer edge of the volute, forming a white foam belt with a certain thickness and a high-speed rotating liquid ring on the outer edge of the impeller. The gas-liquid mixture enters the gas-liquid separation chamber through the diffusion pipe. At this time, due to the sudden decrease in flow rate, the lighter gas is separated from the mixed liquid, and the gas continues to rise and discharge through the pump outlet. The degassed liquid returns to the liquid storage chamber, and enters the impeller again through the return hole, mixing with the gas sucked from the suction pipeline inside the impeller. Under the action of the high-speed rotating impeller, it flows toward the outer edge of the impeller again. As this process repeats continuously, the air in the suction pipeline decreases until the air is exhausted, completing the self-priming process, and the pump then operates normally.

Some pump bearing bodies are also equipped with cooling chambers at the bottom. When the bearing temperature rise exceeds 70℃ due to bearing heating, coolant can be injected into the cooling chamber through any coolant pipe joint for circulation cooling. The sealing structure inside the pump that prevents liquid leakage from high-pressure areas to low-pressure areas is the front and rear sealing rings. The front sealing ring is installed on the pump body, and the rear sealing ring is installed on the bearing body. When the sealing rings wear after long-term operation of the pump, affecting the pump's efficiency and self-priming performance, they should be replaced.

III. Product Details of ZX Self-Priming Centrifugal Pump

IV. Applicable Working Conditions of ZX Self-Priming Centrifugal Pump

① Applicable to urban environmental protection, construction, fire protection, chemical industry, pharmaceutical industry, dye, printing and dyeing, brewing, electric power, electroplating, paper making, petroleum, mining, equipment cooling, oil tanker unloading, etc.

② Applicable to clean water, seawater, chemical medium liquids with acidity and alkalinity, and general paste-like slurries (medium viscosity ≤100 centipoise, solid content up to less than 30%).

③ Equipped with a rocker-type sprinkler, it can spray water into the air and disperse it into fine raindrops, making it a good machine for farms, nurseries, orchards, and tea gardens.

④ It can be matched with any model and specification of filter press, and is the most ideal supporting pump for conveying slurry to the filter press for filter pressing.

V. Model Parameters of ZX Self-Priming Centrifugal Pump